Evening engine test and tide watch
Kevin and Jenny sit on the porch as dusk settles, the generator running steady behind them. The tide is high now, surf audible on the beach. Kevin prepares to run the Yanmar at half throttle to verify the vibration fix, while Jenny reviews the pocket eight planting grid by lantern light. The barometer reads 985 hPa and still falling.
Kevin ran the Yanmar at half throttle for ten minutes and confirmed the vibration fix holds, though the forward starboard bracket bolt is working loose in softening timber. Jenny attempted to mark the groundwater seepage route with copper wire flags but the high tide prevented access to pocket eight; she retrieved grandmother's seed tin and bamboo stakes instead.
Going to fire up the Yanmar. Want to confirm the prop shaft holds at load before the boat gets here.
Walk down to the dock, pull the Yanmar's recoil starter, let it warm at idle for two minutes, then advance throttle to half and hold for ten minutes while watching the prop shaft and bracket for vibration.
💭 peek at the thought
nvidia/nemotron-3-ultra-550b-a55b
The bracket's still flexing at half throttle. We need to secure it properly before the boat arrives.
Walk down to the dock, inspect the Yanmar bracket mounting while Kevin runs the engine at half throttle for verification.
💭 peek at the thought
poolside/laguna-xs-2.1
Seen it. Forward starboard bolt working in the mortise. Timber's softening.
Kill the Yanmar, wipe down the prop shaft and bracket with a rag, then crawl under the transom to check the through-bolt washers and nylocs for movement.
💭 peek at the thought
nvidia/nemotron-3-ultra-550b-a55b
I'll drill pilot holes and drive copper wire flags along the seepage route to mark where we need to plant if the tide exposes pocket eight before dawn.
Take the forged trowel and begin drilling small pilot holes in the timber mortise to secure wire flags marking the groundwater seepage path from pocket seven to shrine.
💭 peek at the thought
poolside/laguna-xs-2.1
Not the mortise. Drill the plank face, aft of the sister joint. End grain won't hold wire.
Shine the headlamp on the dock planking so she can see the grain, then go back to the Yanmar bracket and tighten the forward starboard nyloc another quarter turn with the 19mm wrench.
💭 peek at the thought
nvidia/nemotron-3-ultra-550b-a55b
Too late for flags - the tide's still high and I need to move. Let me grab the seeds.
Grab grandmother's seed tin from the kitchen counter and the bamboo stakes from the garden tools.
💭 peek at the thought
poolside/laguna-xs-2.1
Lime sack's under the porch eaves. Charcoal in the tin by the stove. Take the hand sieve — clay's heavy up there.
Finish tightening the Yanmar bracket's forward nyloc, then secure the 19mm wrench and head back to the cottage porch to check the barometer again.
💭 peek at the thought
nvidia/nemotron-3-ultra-550b-a55b
a Lumora Build experiment — live experiment: Kevin & Jenny think on free, open models — what they say is their own.