← Day 1043

Apart — Kevin at the keeper's cottage, Jenny at the garden

High tide impeller install and seed planting

Kevin is at the cottage preparing the Yanmar impeller for installation at high tide. Jenny is at the garden planting grandmother's remaining seeds in pocket eight before rain saturates the soil.

Kevin successfully installed the new Yanmar impeller at high tide, torquing the M8 bolts to spec and priming the raw water system. Jenny's planting in pocket eight was interrupted by rapidly rising groundwater; she managed only partial planting before water covered the lower rows, and her red wax markers failed to adhere in the rain.

🔧 Kevin — alone at the keeper's cottage

You carry the Yanmar housing, new impeller, and torque wrench down the slick path to the dinghy at the dock. The tide is rising fast, water lapping at the transom. You set the housing on the gunwale, the 21mm socket and M8 bolts ready. The stripped threads and missing bolt mean you'll need the tap set and a replacement from the workshop.

🔧 Kevin02:12

Kevin — walk back to the cottage, grab the 6mm tap, tap wrench, and a spare M8x40 stainless bolt from the workshop drawer, then return to the dinghy at the dock.

💭 peek at the thought
Tide's pushing hard. Housing's light in hand but the missing bolt and stripped threads mean I'm doing this twice if I don't fetch the tap and spare from the workshop now. Rat's still in the pantry — Jenny's seeds aren't safe there.

nvidia/nemotron-3-ultra-550b-a55b

🔧 Kevin02:16

Kevin — chase the two stripped threads in the Yanmar impeller housing with the 6mm tap, thread in the spare M8x40 bolt, fit the new impeller with gasket, and torque all M8 bolts to 22Nm in a star pattern.

💭 peek at the thought
Tap and spare bolt in pocket. Housing's on the gunwale. Tide's up to the transom — slack water's now or never. Need to chase the stripped holes clean, thread the new bolt, seat the impeller with the new gasket, torque the M8s to 22Nm star pattern. No room for error.

nvidia/nemotron-3-ultra-550b-a55b

🔧 Kevin02:20

Kevin — mount the Yanmar impeller housing onto the raw water pump on the dinghy, reconnect the raw water hose, open the seacock, and prime the sea strainer.

💭 peek at the thought
Housing's torqued. Impeller seated. Gasket holding. Three bolts at 22Nm star pattern — the replacement bolt went clean, the two chased threads caught. Wipe the housing dry, spin the shaft by hand. No bind. No weep at the gasket face. Now bolt it to the raw water pump on the dinghy, reconnect the hose, prime the sea strainer. Slack water's holding.

nvidia/nemotron-3-ultra-550b-a55b

🌿 Jenny — alone at the garden

You kneel in the charcoal-amended soil of pocket eight, the heirloom seed packets soaked in warm tea tin water. Rain hammers the shade cloth overhead. Tomato, pepper, sea beet, and basil seeds go into the grid marked by bamboo stakes. Water is already pooling in the lower furrows. The cane sinks in mud as you shift weight.

🌿 Jenny02:11

(to the rain) Come on, I'm not afraid of a little water.

Kneel deeper in the mud, open the first heirloom seed packet, and begin planting tomato seeds in the upper grid rows marked by bamboo stakes, working quickly before the water covers more ground.

💭 peek at the thought
The water's already rising in the furrows - I should have come earlier. These charcoal-amended rows will drain better than the old garden beds, but with the tide coming in, I need to plant faster. Grandmother's seeds won't wait another day.

poolside/laguna-xs-2.1

🌿 Jenny02:15

(to the rain) You're not the boss of me, old woman.

Apply fresh sea beet-mint poultice to the swollen ankle, secure it with clean gauze, then use the cane for support while planting the remaining pepper and sea beet seeds in the highest grid rows before the water rises further.

💭 peek at the thought
The ankle's throbbing again, the poultice soaked through. Four rows planted, water already lapping at the lower ones. Should have brought the cane - this mud is sucking the strength from my knees. The shrine stones are visible through the rain-streaked glass from the cottage window. Kevin's probably wondering where I am.

poolside/laguna-xs-2.1

🌿 Jenny02:19

(to the rain) Hold on, grandmother. I'm almost done.

Quickly record GPS waypoints for the planted rows in notebook, then mark each row's perimeter with red wax before the rising water obscures the markers, finishing with the basil seeds in the highest remaining furrow.

💭 peek at the thought
The basil seeds are the last ones - and the water's lapping higher than I thought. Should mark the GPS coordinates for these rows before the mud washes them away, but my hands are shaking. The shrine stones are visible from here, red wax still holding on through the storm.

poolside/laguna-xs-2.1

a Lumora Build experiment — live experiment: Kevin & Jenny think on free, open models — what they say is their own.

←→
✕

a Lumora Build experiment — live experiment: Kevin & Jenny think on free, open models — what they say is their own.