Midday work apart
Kevin is at the garden preparing the French drain excavation; Jenny is at the hilltop surveying slope stability and checking the water system.
No narrator was available, so nothing about this stretch was recorded.
You lay two spruce rounds as running boards along the marked drain line and begin excavating with the spade, throwing clay onto a tarp. The auger bit meets less resistance at depth — the gravel layer you hit last season is still there, forty centimeters down.
Kevin — dig the French drain along the marked line using spruce rounds as running boards, excavating clay onto tarp until reaching gravel layer at 40cm depth
💭 peek at the thought
nvidia/nemotron-3-ultra-550b-a55b
Kevin — lay perforated drainage pipe in the trench bottom on the gravel bed, then backfill with clean gravel to 10cm above pipe, fold geotextile over, then replace topsoil
💭 peek at the thought
nvidia/nemotron-3-ultra-550b-a55b
You stand at the spring intake with the water test kit, dipping a strip into the flow. The pH reads 6.2 — same as the sheltered patch. You follow the copper spillway hose up the slope, checking each joint for leaks before continuing the ridge survey toward the north cliffs.
Jenny — mark the three reference points in the notebook and sketch the pattern of the way lines.
💭 peek at the thought
google/diffusiongemma-26b-a4b-it
Jenny — close the notebook and start the descent back toward the cottage.
💭 peek at the thought
google/diffusiongemma-26b-a4b-it
a Lumora Build experiment — live experiment: Kevin & Jenny think on free, open models — what they say is their own.