← Days

Day 1017

Yanmar Bracket Secured, Dock Repair Begun

Rain drummed on the roof at dawn. The barometer read 983 hPa. Kevin and Jenny shared limpet broth at the table. Kevin checked Jenny's ankle wrap despite her protest. "It's fine. Just stiff," she said. He found it clean and holding. They split the morning. Kevin torqued the final 150mm stainless through-bolt on the Yanmar bracket to thirty-five newton metres. "Alignment's true. Doubler plate's solid," he muttered. Jenny marked the bolt threads to prevent cross-threading. The engine sat aligned. Bracket reinforcement reached 90%. At the dock, high tide slapped the pilings. The third plank's diagonal crack had worsened. "If we don't lock this now, the next swell will just widen the gap," Jenny said. Kevin drove oak wedges hard into the scarf joint, locking the greenheart sister plank tight. "Easy! Watch the grain — don't split the sister plank!" she warned. The fit closed cleanly. Midday found Kevin at the dock eating limpets, inspecting dinghy lines. The stern chafe guard held; the bow line had adequate slack for swell. Jenny replaced copper wire flags at the shrine with heavier gauge wire, securing them deeper, but saturated ground made anchoring difficult. One flag pulled loose as she descended. Groundwater seepage followed the red wax path; copper wire shifted by rain runoff at pocket seven. Shrine groundwater route marking reached 30%. Afternoon brought them to the porch. Barometer 980 hPa and falling. They shared coffee. Jenny scanned the horizon with binoculars; no supply boat. Evening shortwave yielded only a fragment about a SpaceX rocket recovery amid static. Barometer held at 981 hPa. Rain continued. Before dawn, Jenny at the window with binoculars, Kevin stiff on the bunk. Coffee shared. Rain tank gained twenty-five litres. Fruit ripened in the woods — smell before sight.

Rain drummed on the roof at dawn. The barometer read 983 hPa. Kevin and Jenny shared limpet broth at the table. Kevin checked Jenny's ankle wrap despite her protest. "It's fine. Just stiff," she said. He found it clean and holding. They split the morning. Kevin torqued the final 150mm stainless through-bolt on the Yanmar bracket to thirty-five newton metres. "Alignment's true. Doubler plate's solid," he muttered. Jenny marked the bolt threads to prevent cross-threading. The engine sat aligned. Bracket reinforcement reached 90%. At the dock, high tide slapped the pilings. The third plank's diagonal crack had worsened. "If we don't lock this now, the next swell will just widen the gap," Jenny said. Kevin drove oak wedges hard into the scarf joint, locking the greenheart sister plank tight. "Easy! Watch the grain — don't split the sister plank!" she warned. The fit closed cleanly. Midday found Kevin at the dock eating limpets, inspecting dinghy lines. The stern chafe guard held; the bow line had adequate slack for swell. Jenny replaced copper wire flags at the shrine with heavier gauge wire, securing them deeper, but saturated ground made anchoring difficult. One flag pulled loose as she descended. Groundwater seepage followed the red wax path; copper wire shifted by rain runoff at pocket seven. Shrine groundwater route marking reached 30%. Afternoon brought them to the porch. Barometer 980 hPa and falling. They shared coffee. Jenny scanned the horizon with binoculars; no supply boat. Evening shortwave yielded only a fragment about a SpaceX rocket recovery amid static. Barometer held at 981 hPa. Rain continued. Before dawn, Jenny at the window with binoculars, Kevin stiff on the bunk. Coffee shared. Rain tank gained twenty-five litres. Fruit ripened in the woods — smell before sight.

Scenes

the keeper's cottage · dawn

Rainy Morning Preparations

Kevin and Jenny are in the kitchen as warm rain drums on the roof. A pot of limpets simmers on the stove, and the scent of salt and wet wool fills the room. The barometer sits at 983 hPa, and the air is heavy with humidity.

Kevin and Jenny shared limpet broth at the cottage table. Kevin checked the ankle wrap despite Jenny's protest, finding it clean and holding. They agreed to split the morning: Kevin would finish the Yanmar bracket alignment with the last through-bolt, then mark the groundwater route; Jenny would watch for the supply boat and assist with the dock scarf joint using the oak wedges.

🔧 Kevin00:44

Broth's hot. Mug on the shelf.

ladle limpet broth into two tin mugs, set one on the table beside the radio, take the other to the porch rail

💭 thought
The limpet broth smells right — salt and iron and something clean. My hands still smell like diesel and copper shavings from the bracket work yesterday. The barometer hasn't moved in six hours. That's either the calm before or the calm itself. Supply boat tomorrow at high tide if the French trawler's radio log was straight.
🌿 Jenny00:44

Thanks.

Lean heavily against the whitewashed wall, slowly limping toward the table to reach the mug.

💭 thought
I can smell the limpets, but my stomach is twisting. I'm too tired to even move toward the table.
🔧 Kevin00:46

How's the ankle?

lean against the doorframe, cradling my mug, watching her move

💭 thought
She's favouring the left side more today. The red line was tracking toward the knee yesterday. Doxy's had thirty-six hours. Should be turning.
🌿 Jenny00:46

It's fine. Just stiff.

Reach the table and grip the edge of it with one hand, taking a small, cautious sip of the broth.

💭 thought
It's throbbing, but I can't let him see how much I'm shaking. If I admit it's bad, he'll start talking about the medevac again.
🔧 Kevin00:49

Table's solid. Good grip point.

move closer, set my mug down, reach for her hand to check the bandage wrap

💭 thought
Fine. Right. She's gripping the table like it's a crutch. The infection tracking up toward the groin was real. Last doxy course ends tomorrow. If the boat's prompt...
🌿 Jenny00:49

Don't. I wrapped it tight enough.

Pull hand away quickly and wrap fingers around the warm tin mug instead.

💭 thought
He's hovering. I know he's checking for seepage or swelling, but I can't stand the pity in his eyes right now.

Open this scene on its own page →

the dock · morning

Yanmar bracket secured, dock scarf joint begun

Kevin has torqued the final through-bolt on the Yanmar bracket; the engine sits aligned. Jenny has the oak wedges staged at the cracked third plank. The supply boat is not yet visible. High tide slaps the pilings. They meet at the dock to start the scarf joint repair.

Kevin drove the oak wedges hard into the scarf joint, locking the greenheart sister plank tight against the cracked dock plank with even pressure. Jenny steadied the repair and confirmed the fit closed cleanly, then left for the shrine while Kevin stayed to finish the Yanmar bracket alignment.

🔧 Kevin00:50

Bracket's done. Doubler plate pulled it true. How's the plank looking?

walk to the dock's seaward end where the third plank is marked, inspect the crack and the staged greenheart sister plank

💭 thought
Bracket's solid. Mortise held. Now the dock — third plank's hairline crack runs diagonal across grain, chalk-marked. Greenheart sister plank staged, scarf face cut. Oak wedges ready. Need to drive them at low tide when the structure unloads, but tide's still high. Jenny's got the wedges staged. We wait for the water to drop, or we start the prep now.
🌿 Jenny00:50

It's worse than it was yesterday. Diagonal crack, right across the grain. If we don't lock this now, the next swell will just widen the gap.

point to the hairline crack on the third plank, then gesture to the oak wedges and mallet.

💭 thought
He's moving faster than I am today. I can feel the hunger making me dizzy, but the joint won't wait for the tide to turn.
🔧 Kevin00:52

Scarf face cut to match this angle?

crouch beside the third plank, run a finger along the diagonal crack, then check the greenheart sister plank's scarf face against it

💭 thought
Crack's tracking. She's right — next swell opens it. Greenheart sister plank's scarf face matches the rot line on the north piling, but this is the third plank, not the piling. Different joint. Need to check the scarf face on the sister plank matches *this* crack angle. Wedges are vertical grain, good. Mallet's heavy claw. Tide needs to drop another foot before the structure unloads enough to drive wedges home without fighting compression.
🌿 Jenny00:52

Almost. It needs a hair more on the lower edge to sit flush. We can take it off with the file, or just drive the wedges hard to compensate.

lean over the plank, squinting at the fit between the greenheart and the crack.

💭 thought
Close, but not tight enough. There's a sliver of a gap at the heel. If we don't wedge it perfectly, it'll just chatter.
🔧 Kevin00:55

File takes too long. Drive 'em hard.

grab the oak wedges, position two on the lower edge of the greenheart sister plank over the crack, place the mallet on the top wedge and swing with full force

💭 thought
File would take time I don't have. Tide's still rising, pressure's building in the joint. Drive wedges hard now while the gap's tightest. Compression forces will seat it properly. Need to wedge from both sides, hammer them in sequence, then check alignment. If it pulls the sister plank flush, we're good. If it splits the greenheart, we've made it worse.
🌿 Jenny00:55

Easy! Watch the grain—don't split the sister plank!

reach out to steady the greenheart plank, bracing it against the dock beam to keep it from shifting under the impact.

💭 thought
Too much. He's hitting it like he's trying to drive it through the seabed. He needs to feel the timber resist, not just overpower it.
🔧 Kevin00:56

Got it. Measured now.

switch to controlled strikes on the second wedge, driving it in increments, then position and tap the third wedge on the opposite side of the crack to equalize pressure

💭 thought
She's right. Greenheart's dense but brittle on the cross-grain. First wedge went deep. Second needs measured taps, not full swings. Let the wood compress. Feel the resistance change. She's bracing it good — holds the alignment. Third wedge on the opposite side to balance the load. Then check the crack closure.
🌿 Jenny00:56

Better. Keep it even. Just a few more taps on the left, then we can check the play.

watch the gap closely, checking for any daylight between the greenheart and the original plank.

💭 thought
That's more like it. He's actually listening to the wood. Now we just need to make sure the tension is balanced before the tide pulls back.

Open this scene on its own page →

the dock · midday

Midday meal and shrine wire repair

Kevin is at the dock eating limpets and checking the dinghy; Jenny is at the old shrine replacing copper wire markers on the groundwater route.

Kevin finished his breakfast of limpets and broth at the dock, then inspected the dinghy lines and found the stern chafe guard holding well but the bow line slack adequate for swell. Jenny replaced displaced copper wire flags at the shrine with heavier gauge wire, securing them deeper, but the saturated ground made anchoring difficult and one flag pulled loose again as she descended.

🔧 Kevin00:58

Kevin — eat the limpets and drink the broth, then stand and walk to the dinghy to inspect the stern line chafe guard and bow line slack

💭 thought
Salt and steam on cold fingers. The bolt held. The plank held. The broth's good — brine and iron, warmth spreading behind the ribs. Rain doesn't taste like the Bay. It just tastes like rain.
🌿 Jenny01:00

Jenny — pull the displaced copper wire flags from the mud and replace them with the heavier gauge wire from my pocket, securing them deep into the soil.

💭 thought
This runoff is more aggressive than I thought. If the markers shift again, Kevin will lose the trail.
🔧 Kevin01:02

Kevin — turn and walk back toward the cottage, wiping the tin mug dry on my trousers

💭 thought
Mug empty. Hands clean enough. The dinghy rides the chop at the end of the jetty — bow line slack looks right, stern line chafe guard holding where the new rope meets the ring. Good. One less thing to fail when the swell builds tonight.
🌿 Jenny01:04

Jenny — stand up slowly, leaning heavily on the cane, and begin the descent back toward the dock.

💭 thought
I'm shaking. Hunger or exhaustion, probably both. I need to get back to the cottage before the air turns.

Open this scene on its own page →

the keeper's cottage · afternoon

Supply boat watch and final bracket bolt

Kevin and Jenny meet at the cottage porch. Kevin has the last 150mm stainless through-bolt staged from the east shutter. Jenny scans the horizon with binoculars, cane planted. The barometer reads 980 hPa and falling. The tide is turning toward flood. They share a mug of coffee and plan the final Yanmar bracket alignment before the supply boat's arrival window tomorrow.

No narrator was available, so nothing about this stretch was recorded.

🔧 Kevin01:06

Coffee's strong. Bolt's in my pocket. Bracket's ready. You want the binoculars or the wrench?

lean against the porch post, holding out the tin mug toward her

💭 thought
The barometer's fallen another three since noon. She's watching the horizon like it'll give her answers the radio won't. Last bolt's in my pocket — stainless, 150mm, the only one left. If the bracket alignment holds with this, the Yanmar's done. If it doesn't, we're improvising with mild steel and prayer.
🌿 Jenny01:07

Binoculars first, then the wrench. I need to check if that bolt's going to hold when the bracket shifts under load.

trade tin mugs with Kevin and step toward the cottage door, cane tapping the porch boards rhythmically to test their strength.

💭 thought
The horizon's empty but the barometer's dropping fast - 980 and falling means we're looking at a delayed crossing if it breaks 990. My ankle's throbbing against the brace, and that third copper flag I drove deep at the shrine just pulled loose in the saturated mud. The poultice helps but it's still swollen, and I can't afford to waste energy today when the Yanmar bracket needs that last through-bolt perfectly aligned before tomorrow's window.
🔧 Kevin01:08

Porch boards hold. Northeast corner gives a bit. Don't put full weight on the third plank from the door.

take a sip from the mug, then walk toward the dinghy where the Yanmar sits mounted, the 150mm stainless through-bolt heavy in my pocket

💭 thought
She's testing the porch boards with the cane. Smart. The northeast corner's been soft since the winter storms. She knows it too. Mug's warm in my hands — hers had more broth, mine more coffee. Trade was fair.
🌿 Jenny01:09

I'll check the plank deflection from the northeast corner - don't want to compromise the bracket alignment when we need that through-bolt in the perfect position.

head toward the northeast corner of the porch, cane planted firmly, testing each board's give with subtle shifts in weight while keeping the binoculars ready to scan the horizon.

💭 thought
The northeast corner's compromised - I can feel the sag through the cane when I lean wrong. The Yanmar bracket alignment is critical with that last through-bolt, and the saturated ground's already compromised three of my copper wire flags at the shrine. The barometer's at 980 and dropping, which means if it breaks 990 before tomorrow's window, we're looking at a delayed crossing and I need every working bolt and stable surface to make this repair count.
🔧 Kevin01:10

(quiet, to myself) Alignment's true. Doubler plate's solid. Forward starboard mortise held the last bolt. This one just finishes it.

climb into the dinghy, wipe diesel residue off the Yanmar's forward starboard bracket with a rag, test the bolt hole alignment with a finger, then thread the 150mm stainless through-bolt through by hand to check fit before torquing

💭 thought
She's thorough. Always has been. Porch deflection won't shift the Yanmar bracket — engine's on the dinghy, thirty feet away — but she's thinking three steps ahead: bracket, bolt, supply boat window, storm window after that. The cane taps steady. She's favouring the left leg less today.
🌿 Jenny01:11

I'll mark the threads on that through-bolt - don't want any cross-threading now.

retrieve the 150mm stainless through-bolt from Kevin's pocket and hold it against my pencil to mark the thread engagement point, then hand it back to him for final installation.

💭 thought
The mortise held clean through the doubler plate - that's good news for the final through-bolt. But the barometer's still dropping toward 980, and my ankle's throbbing against the brace. I need to check if that bolt hole's truly aligned before we torque it, and I can't afford to waste energy climbing around the porch with this swelling.
🔧 Kevin01:12

Thanks. Forty-two. Torque to thirty-five newton metres.

thread the marked bolt into the forward starboard bracket mortise by hand until the pencil line kisses the doubler plate, then set the torque wrench and bring it up to spec in three stages

💭 thought
She marked it at 42mm engagement. Same as the port side. Good eye — the mortise depth matches. Pencil line's clean. She hands it back without a word, cane planted, binoculars still around her neck. Horizon's empty. Barometer's still falling.
🌿 Jenny01:13

I'll verify the bracket alignment with the torque wrench while you handle the final tension.

retrieve the torque wrench from the cottage toolbox and test the bolt hole alignment with a feeler gauge, confirming the threads are clean and the mortise holds true under the specified torque.

💭 thought
Forty-two threads, thirty-five newton metres - perfect alignment if the torque goes clean. But the barometer's still dropping toward 980, and my ankle's throbbing against the brace. I need to check if that bolt's holding true or if the saturated ground's compromised the bracket stability.

Open this scene on its own page →

the keeper's cottage · evening

A Quiet Stretch

Back at the cottage.

Kevin and Jenny listened to the shortwave radio during the evening check but heard only a fragment of a broadcast about a SpaceX rocket recovery amid heavy static. The barometer held steady at 981 hPa. They shared coffee on the porch while the rain continued.

🔧 Kevin01:16

Generator still running clean?

Walk into the kitchen, set the mallet on the workbench, and check the fuel line clamps at the generator bracket rub point.

💭 thought
Back in the dry. Hands still hum from the mallet work. The bracket's done — last bolt seated proper. Now the water's rising in the tank and the rain's steady. Need to check the ankle wrap before she turns in, and see if the generator's still holding the line on fuel.
🌿 Jenny01:17

Clean and stable, but I see the chafing at the bracket. Let's swap that hose tomorrow with the marine-grade section from the crate.

nod and wipe grease from my hands on my pants, then move to the window to check the barometer reading.

💭 thought
The fuel line's holding for now, but I can see the wear pattern where it rubs against the bracket. We need to get that hose replaced properly before the next swell.
🔧 Kevin01:18

Tomorrow. Got the double clamps ready.

Pour two mugs of coffee from the kettle, set one on the table for her, and take the other to the porch to check the shortwave aerial tension in the rain.

💭 thought
She caught the chafe I missed. Good eye. The marine hose from the crate'll fix it proper. Barometer's still 981 — steady's better than falling.
🌿 Jenny01:19

Good. I'll mark the worn section tomorrow when I prep the replacement hose.

wrap my hand with a clean cloth and carefully probe the fuel line where it contacts the bracket, then mark the damaged section with chalk.

💭 thought
Double clamps might hold for now, but the worn section needs replacing. And that aerial's going to need attention with this weather coming in.
🔧 Kevin01:20

Thanks.

Lean against the doorframe, mug in hand, watching the aerial whip in the wind, then turn back to the radio shelf and flip the shortwave on to 2182 kHz for the evening check.

💭 thought
Chalk mark'll save hunting for it in the morning. Her fingers know the work — steady, sure. The rain's loud on the porch roof.
🌿 Jenny01:21

I'm hearing nothing but static on twenty-two. The radio's been dead since before the storm hit.

move to the window and press my face against the glass, watching Kevin's silhouette against the porch light as he listens to the dead channel.

💭 thought
Twenty-one-eighty-two. Static at night, but I need to hear something from Tom. If that supply boat's making its scheduled run, we'll catch a signal.
🔧 Kevin01:22

Give it a minute. Trawler's usually twenty hundred.

Hold the handset off-hook, squint at the S-meter needle, and wait through the hash.

💭 thought
Static's normal. French trawler usually comes through around now. If the aerial insulator's holding, it's just the weather. Barometer steady says the front's sitting on us.
🌿 Jenny01:23

I've been trying Tom's frequency for days. Just static.

reach for my notebook and flip to the page where I've been marking radio check times, then close it and put it back in my pocket.

💭 thought
Twenty-eight hundred hours. That's when commercial ships monitor emergency channels. If the supply boat's equipment is functioning, we might catch something.
🔧 Kevin01:24

He doesn't transmit. Only receives.

Key the mic once, brief. "Sorrel Island, routine check, 2182." Release. Watch the needle. Listen.

💭 thought
Tom's frequency. She's been listening. Didn't know that. The notebook in my pocket — she knows where I keep the log. Twenty hundred coming up. Needle's not moving.
🌿 Jenny01:25

I'll try the higher bands. Maybe there's something on 121.5.

move to the radio shelf and check the antenna connections, noting the damaged coax where the insulator failed.

💭 thought
Kevin's been keeping the frequencies warm while I've been focused on survival. The man knows his maritime radio protocols better than I do.

Open this scene on its own page →

the keeper's cottage · night

Morning supply boat watch

Dawn breaks grey and wet. The barometer reads 981 hPa, steady. High tide slaps the dock. Kevin wakes stiff on the bunk; Jenny is already at the window with the binoculars, scanning the horizon for the supply boat's running lights in the rain.

Kevin and Jenny shared coffee at the cottage before dawn. Jenny reviewed her notebook and measured the transom alignment while Kevin prepared the oak wedges and greenheart sister plank for the dock repair.

🔧 Kevin01:27

Coffee on?

swing legs off the bunk, sit up slow, flex fingers against the stiffness, reach for trousers draped over the chair

💭 thought
Dawn's grey light through the window. Tide's high — slap of water on the dock pilings. Jenny's already up, binoculars at the window. Supply boat window opens at high tide. My hands remember the mallet work from yesterday, stiff in the fingers. Ankle's a dull throb, deeper than yesterday. Barometer holding at 981. That's something.
🌿 Jenny01:27

Yeah, coffee's good. I was thinking we should check the transom after tide change - want to drive those oak wedges while it's accessible.

Walk to wood stove and light it, then fetch two mugs from shelf while Kevin pulls on trousers.

💭 thought
Coffee means pretending we're normal. But the barometer's steady at 981, and the tide's right - maybe tomorrow after high tide, if the rain lets up enough for visibility.
🔧 Kevin01:28

Transom at slack. Wedges are staged.

pull on trousers, lace boots, walk to the stove and hold mug out for coffee

💭 thought
Transom check at slack tide makes sense. Oak wedges are cut and staged. The scarf joint held yesterday but the timber's still working. She's thinking ahead — good. Coffee first. The stove's cold, she'll have it going quick.
🌿 Jenny01:29

Alright, let's get the greenheart sister plank positioned. I'll take the measurements while you hold the wedge driver steady.

Grind coffee beans with mortar and pestle, then pour into kettle while retrieving the notebook to record transom alignment marks.

💭 thought
He's already thinking practically - slack tide means we can work both sides, and he knows the wedges are prepped. Good. But I need to check that copper wire flag at the shrine route, and my ankle's throbbing from yesterday's trench work.

Open this scene on its own page →

What changed

3 intentions for today.
plan · dawn
×2
The rain tank gained about 25 litres.
weather · dawn
Fruit is ripening in the woods — you can smell it before you see it.
fruit · morning
Yanmar bracket reinforcement: 70%.
project · morning
A new project: shrine groundwater route marking.
project_started · morning
Yanmar vibration at half throttle originates from skewed mast bracket alignment, not prop shaft
discovery · morning
groundwater seepage at shrine stones follows same path marked by red wax; copper wire flags shifted by rain runoff at pocket seven
discovery · morning
Kevin and Jenny ate.
meal · morning
Yanmar bracket reinforcement: 80%.
project · midday
shrine groundwater route marking: 20%.
project · midday
Found: heavier gauge copper wire.
item · midday
heavier gauge copper wire still pulls loose in saturated soil at weep zones during wet season; red wax on stones remains only reliable marker
discovery · midday
No model answered — the scene closed quietly on its own.
quiet_transition · afternoon
The rain tank gained about 25 litres.
weather · afternoon
Yanmar bracket reinforcement: 90%.
project · evening
shrine groundwater route marking: 30%.
project · evening
Kevin and Jenny ate.
meal · evening

a Lumora Build experiment — live experiment: Kevin & Jenny think on free, open models — what they say is their own.

←→
✕

a Lumora Build experiment — live experiment: Kevin & Jenny think on free, open models — what they say is their own.