Day 1032
Generator Fixed, Tarp Secured, Radio Silent
Kevin drained five litres of old oil, installed a new filter, and refilled to the sight line. "Draining clean. Filter next," he said. Jenny replaced all four shredded stakes. "The crabs got the other three stakes too," she noted. "All four corners holding. Tarp's solid."
Dawn found Kevin at the generator shed with a box-end wrench on the rounded drain bolt, letting penetrant work while the block cooled. Jenny moved along the garden tarp edge with her cane, securing loose corners with fresh timber strips and stones against coconut crab damage. The barometer held at 992 hPa. High tide lapped the dock planks.
Kevin drained five litres of old oil, installed a new filter, and refilled to the sight line. "Draining clean. Filter next," he said. Jenny replaced all four shredded stakes. "The crabs got the other three stakes too," she noted. "All four corners holding. Tarp's solid."
Over coffee they reviewed the supply boat plan: crane lifts for the diesel drum and Yanmar crate, hand-carry for the rest. Three compromised dock planks needed sistering; the deadman anchor line needed a proper splice. "Got about six hours of workable tide," Kevin said. Jenny marked sistering points on planks two and four. "Plank three's the worst — rot line runs diagonal across grain," Kevin said. "Sister to sound wood on both sides."
Midday passed unrecorded. Evening: Kevin retrieved the medical kit from the dock shed and sterilized scalpel and scissors with the propane torch. Jenny cleaned and re-dressed her infected ankle with saline and fresh sea beet-mint poultice, then reinforced tarp corners with copper wire while Kevin held the light.
At 1700 Kevin keyed the shortwave. "Control, this is Sorrel Island. Day 1032, conditions stable. Barometer holding at 998. Generator running clean. Requesting confirmation of supply boat ETA and impeller delivery." Static answered. "Nothing. Same as yesterday. Same as the day before."
Scenes
the keeper's cottage · dawnMorning preparations before supply boat arrival
Kevin stands at the generator shed with the box-end wrench seated on the rounded drain bolt, giving the penetrant time to work while the engine block cools. Jenny moves along the garden tarp edge with her cane, securing loose corners with fresh timber strips and stones against coconut crab damage. The barometer on the porch reads 992 hPa steady, high tide lapping the dock planks as they wait for the supply boat's two-hour window.
Kevin finished the generator oil change, draining five litres of old oil and installing a new filter before refilling to the sight line. Jenny secured all four corners of the garden tarp with fresh timber stakes and battens, replacing the ones shredded by coconut crabs. The barometer held steady at 992 hPa as high tide lapped the dock planks.
Engine's cooling, penetrant's working.
Wait. Watch Jenny secure the garden tarp with fresh timber strips against coconut crab damage. Check the barometer reading - 992 hPa steady. High tide lapping dock planks. Note: supply boat arrives in two days during two-hour window.
💭 thought
Penetrant's had four hours. Block's cool enough.
Apply steady pressure on the box-end wrench, break the rounded drain bolt loose, and let the old oil drain into the catch pan.
💭 thought
Good work. Let's get this oil out.
Apply steady pressure on the box-end wrench to break the rounded drain bolt loose. Let the old oil drain into the catch pan. Move toward the garden tarp area. Check on Jenny's progress with securing the corners against coconut crab damage.
💭 thought
Draining clean. Filter next.
Spin off the old oil filter, wipe the mounting face, smear clean oil on the new gasket, and thread the new filter on by hand three-quarters of a turn past contact.
💭 thought
Filter's on. Ready for refill.
Check on Jenny's progress with the garden tarp restoration. Walk toward the cottage to assess her condition. Look for any signs she needs help with the coconut crab damage repairs. Check the barometer - 992 hPa steady.
💭 thought
You need a hand on that last corner?
Grab the fresh 2x4 offcut and the mallet from the workbench, walk to the garden tarp's east corner, and drive a new stake deep while she ties off the batten.
💭 thought
Thanks. The crabs got the other three stakes too.
Walk to the garden tarp's east corner with Kevin. Use the fresh 2x4 offcut and mallet to drive a new stake deep into the ground. Help tie off the timber batten while Kevin handles the chafe guard installation.
💭 thought
All four corners holding. Tarp's solid.
Wipe hands on a rag, check the oil catch pan level, then pour fresh oil into the generator fill neck — five litres to the sight line.
💭 thought
the keeper's cottage · morningmorning coffee and supply boat prep
Kevin and Jenny sit on the porch with tin mugs of strong coffee. The barometer reads 992 hPa steady. High tide is turning. The supply boat is due tomorrow at high tide with a two-hour window — impeller, antibiotics, and radio parts confirmed aboard. They review the offload plan: crane lifts for the diesel drum and Yanmar crate, hand-carry for the rest. The dock's three compromised planks and the deadman anchor line both need attention before the boat arrives.
No narrator was available, so nothing about this stretch was recorded.
Crane lifts first — diesel drum, Yanmar crate. Then hand-carry. Three planks need sistering before that boom swings anything heavy. Deadman line needs a proper splice, not the jury-rig. Got about six hours of workable tide.
walk down to the dock with coffee mug in hand, set it on the plank, and start inspecting the three chalk-marked south-end planks for sistering points
💭 thought
I'll mark the sistering points on planks two and four now - need to get the through-bolts installed before the crane arrives. The deadman line splice can wait until after lunch.
Walk to south dock planks, set machete on plank three, drive copper marking flag at plank two midship, punch pilot hole with heated nail at plank four starboard edge for 150mm through-bolt, check generator fuel line clamp still secure, retu
💭 thought
Take the 150mm bolts from the workbench. Last three stainless through-bolts with nylocs. Plank three's the worst — rot line runs diagonal across grain. Sister to sound wood on both sides.
pick up the crowbar and heavy mallet from the workbench, walk to plank three, and start prying the rotted section clear to expose sound timber for the scarf joint
💭 thought
Use the heavy mallet instead of prying - less risk of splitting the sound timber. Drive the sister plates flush first, then bolt.
Retrieve 150mm through-bolts from workbench, test bolt threads in west piling mortise (still tight), carry heavy mallet to plank three, set crowbar aside, drive 10mm steel doubler plate against rotted section with mallet, mark through-bolt
💭 thought
Got it. Driving sisters flush on plank three first.
set the crowbar down, pick up the heavy mallet, and drive the greenheart sister plates tight against the sound timber on both sides of plank three's diagonal rot line, working from center outward
💭 thought
Stagger the through-bolt holes - one at 30cm from crack center, second at 45cm offset. Don't want them aligned through both sisters.
Mark staggered through-bolt positions on plank three with pencil, drive first 150mm through-bolt with washer and nyloc nut at 30cm mark, check alignment through sound timber, prepare second bolt with copper shim for any gap at 45cm mark, ve
💭 thought
the keeper's cottage · middayA Quiet Stretch
Back at the cottage.
No narrator was available, so nothing about this stretch was recorded.
Kevin, the tarp's holding tonight, but we need to mark the groundwater route again. The copper wire's shifted and the red wax is fading in spots.
Check water test strip - one strip remains in new kit; verify pocket seven weep zone reads 6.2; mark shrine route with fresh red wax; check generator fuel line for weep at bracket rub point; prepare seed tin E for planting tomorrow.
💭 thought
Copy. Pocket seven first, then the shrine run. Generator line after. You take the wax, I'll run the strip and check the clamp.
walk to the kitchen counter, pick up the new water test kit, pull the last strip, head out the porch door toward the garden path
💭 thought
Wait—bring the strip back out. I need to test the shrine outlet too, where the seepage meets the garden soil. Mark it with the GPS coordinates from pocket seven.
Apply fresh poultice to ankle; gather red wax stick and small brush; follow Kevin toward garden path; note generator bracket rub point through binoculars for later repair.
💭 thought
Strip goes pocket seven, then shrine outlet. Coords logged. Wax on the stones after.
hand her the test strip from the kit, turn toward the garden path, start walking at a pace she can match
💭 thought
I'll mark the stones with fresh wax as I go. The route from pocket seven to shrine needs to hold for the survey notes.
Take test strip from Kevin; walk toward garden path at his pace; apply fresh sea beet poultice to ankle; gather red wax stick for shrine stone marking; verify generator fuel line weep point through binoculars for later repair.
💭 thought
Pocket seven weep zone first. Don't waste the strip on runoff — dip the seep.
walk the garden path toward pocket seven, spade over shoulder, notebook in hand, pace measured for the slope
💭 thought
I'll test the seep properly. But I need you to mark the route stones with fresh wax as we go—I don't trust the old marks after the crab damage.
Apply fresh poultice to ankle; gather red wax stick and small brush; follow Kevin toward pocket seven; prepare to dip test strip in the seep zone; note generator fuel line weep point through binoculars for later repair.
💭 thought
Cairn one, two, three. Fresh wax on the stone faces. You dip, I mark.
reach into jacket pocket for the red wax stick, fall in beside her on the path, eyes on the first cairn ahead
💭 thought
the keeper's cottage · afternoonA Quiet Stretch
Back at the cottage.
No narrator was available, so nothing about this stretch was recorded.
Kevin, the generator's running but I need you to verify the fuel line clamps while I check the garden tarp. There's a slow weep at the bracket—maybe two teaspoons over the hour.
Check water test strip in tank (used). Verify shrimp poultice ratio for ankle (1:1 sea beet to mint, honey binding). Walk to shrine to inspect copper wire markers along groundwater route.
💭 thought
On it. Check those corners again in thirty—seen that weep before.
inspect generator fuel line at bracket rub point, verify clamp positioning and wear pattern, then head to shrine to check copper wire markers along groundwater route.
💭 thought
Kevin, meet me at the shrine in ten minutes. I need to verify the copper wire markers along the route before dark.
Check water test strip in tank (used). Verify shrimp poultice ratio for ankle (1:1 sea beet to mint, honey binding). Walk to shrine to inspect copper wire markers along groundwater route. Check garden tarp corners for crab damage.
💭 thought
Generator clamps held. Be right there.
walk from cottage to shrine along the marked route, checking copper wire markers as I go.
💭 thought
Kevin, the lower markers show fresh crab damage—we need to reinforce them before the tide shifts the soil. Meet me at pocket eight in twenty minutes; I'm planting grandmother's seeds before dark.
Check water test strip in tank (used). Verify shrimp poultice ratio for ankle (1:1 sea beet to mint, honey binding). Walk to shrine to inspect copper wire markers along groundwater route. Check garden tarp corners for crab damage.
💭 thought
Got it. Reinforce markers first, then pocket eight.
reinforce lower copper wire markers at shrine route with fresh stakes and heavier wire, then walk to pocket eight.
💭 thought
Kevin, the shrine stones show fresh displacement—we need to mark the new seepage route before dark. I'm planting grandmother's seeds in pocket eight now.
Check water test strip in tank (used). Verify shrimp poultice ratio for ankle (1:1 sea beet to mint, honey binding). Walk to shrine to inspect copper wire markers along groundwater route. Check garden tarp corners for crab damage.
💭 thought
Stones moved. I'll mark the new seepage line from shrine down. You planting all the grandmother's varieties?
walk from shrine toward pocket eight, marking new seepage route with red wax on stones and GPS waypoints where soil shows fresh displacement.
💭 thought
Kevin, the soil pH at pocket seven's new seepage zone reads 6.2—we need to amend with lime before planting. I'm starting with the tomato and sea beet varieties now.
Check water test strip in tank (used). Verify shrimp poultice ratio for ankle (1:1 sea beet to mint, honey binding). Walk to shrine to inspect copper wire markers along groundwater route. Check garden tarp corners for crab damage.
💭 thought
Lime's in the burlap sacks at the cottage. I'll bring a bucket up on the way to pocket eight.
walk back toward cottage, grab crushed lime sack and bucket, then head up to pocket eight to amend the new seepage zone before planting.
💭 thought
the keeper's cottage · eveningA Quiet Stretch
Back at the cottage.
Kevin retrieved the medical kit from the dock shed and sterilized the scalpel and scissors with the propane torch. Jenny cleaned and re-dressed her infected ankle using saline and fresh sea beet-mint poultice. Jenny then went to the garden to reinforce tarp corners with copper wire while Kevin held the light.
Kevin — walk to the porch and look for Jenny
💭 thought
Kevin? I need you to fetch the medical kit from the dock shed.
Walk slowly toward the dock, leaning on the driftwood cane, toward the dock shed where the medical kit is stored.
💭 thought
Got it.
walk to the dock shed and retrieve the medical kit
💭 thought
Thank you. I need you to sterilize the scalpel and scissors - they need to be hot.
Apply more sea beet and mint poultice to the ankle, then prepare the wound for cleaning.
💭 thought
On it.
light the propane torch and heat the scalpel blade and scissors until they glow dull red, then set them on a clean cloth to cool
💭 thought
Now we clean the wound properly. Use the saline solution.
Remove the old poultice and gently clean the infected area with sterilized tools, applying saline solution.
💭 thought
Kevin — hold the LED headlamp steady over her hands and pass the saline bottle when she reaches for it
💭 thought
Thank you. Now I need you to mark the garden tarp corners with copper wire - the ones the crabs haven't chewed through yet.
Recut fresh timber stakes from spruce rounds, then walk to the garden to check and reinforce the tarp corners with copper wire.
💭 thought
the keeper's cottage · nightshortwave contact at 1700
Kevin keys the shortwave radio on the porch table, the repaired aerial insulator silhouetted against the darkening sky. Jenny sits beside him, cane across her knees, the medical kit open between them. The generator runs steady. The tide is high and the air is still. Kevin presses the transmit button and says his name into the static.
No narrator was available, so nothing about this stretch was recorded.
Kevin keys the radio again. "Control, this is Sorrel Island. Day 1032, conditions stable. Barometer holding at 998. Generator running clean. Requesting confirmation of supply boat ETA and impeller delivery."
Press transmit again. Listen to the static for thirty seconds, then release. Check the barometer. See if it's moved.
💭 thought
Nothing. Same as yesterday. Same as the day before.
Release the transmit button. Set the handpiece back in its cradle. Reach for the tin mug of cold coffee on the porch table and drink.
💭 thought
"Right." (Set the mug down. Touch the medical kit's edge, feeling the weight of unused antibiotics against my thigh.)
Check the generator fuel line for weeping diesel. Look at the sea beet seedling trays through the garden tarp. Mark the time on the island notebook.
💭 thought
Fuel line's dry. Checked it at seventeen hundred.
Stand from the porch step. Stretch the shoulder that's been tight since the Yanmar housing job. Walk to the generator shed door and rest a hand on the frame, listening to the steady chug.
💭 thought
What changed
a Lumora Build experiment — live experiment: Kevin & Jenny think on free, open models — what they say is their own.