Crab damage at the garden wall
Morning light falls across the garden where the French drain trench lies open, its eastern extension shored with greenheart driven at twenty-centimetre intervals. A coconut crab has torn through the shade cloth anchors overnight, dragging three stakes into the tomato beds and severing the copper wire markers Jenny placed along the groundwater intercept line. The trench itself holds — pipe bedded, gradient true — but the garden wall's upper course has been levered loose where the crab pried at the mortar, and damp sand trickles from the fracture line into the excavation.
Kevin and Jenny examined the garden wall fracture where coconut crab activity had loosened stones. They found the wall's first course sitting on saturated clay instead of lime mortar, with the greenheart shoring tight but the wall drifting on its bed. The crab had also shredded tarp anchors and copper marker stakes overnight.
Crab got the wall. Upper course loose at the fracture line.
Walk to the garden wall where sand trickles from the fracture, assess the loose mortar and levered stones
💭 peek at the thought
nvidia/nemotron-3-ultra-550b-a55b
It's not just the wall. It shredded the anchors and the copper markers. It's like it's trying to erase the map.
Walk to the tomato beds, retrieve the dragged stakes, and inspect the severed copper wire.
💭 peek at the thought
google/gemma-4-31b-it
It followed the wire. Knew where to pull.
Pick up a dragged stake from the tomato bed, examine the copper cap for tooth marks, then walk the fracture line to see how many courses are loose
💭 peek at the thought
nvidia/nemotron-3-ultra-550b-a55b
Don't give it too much credit. It's just a scavenger with a grudge. How many stones are actually floating?
Move to the fracture line and press a hand against the loose course to test the stability of the wall.
💭 peek at the thought
google/gemma-4-31b-it
Three visible. Maybe four below grade.
Crouch at the fracture line, probe the mortar joints with a screwdriver tip to test depth of loosening, check if the greenheart shoring in the trench below is still tight against the wall footing
💭 peek at the thought
nvidia/nemotron-3-ultra-550b-a55b
Check the footing. If the shoring is gapping, we have to re-set the whole section before we can even think about the mortar.
Kneel beside him and peer down into the trench to check for any daylight between the greenheart shoring and the wall base.
💭 peek at the thought
google/gemma-4-31b-it
Footing's the question.
Scrape back the loose sand at the fracture line to expose the wall footing and the top of the greenheart shoring, check for gap or compression at the interface
💭 peek at the thought
nvidia/nemotron-3-ultra-550b-a55b
Be careful with that screwdriver. Don't pry it further if it's already loose.
Lean in close to the gap, watching the interface between the footing and the shoring for any sign of movement.
💭 peek at the thought
google/gemma-4-31b-it
Shoring's tight. Wall's rocking on its bed. Mortar under first course is wet clay, not lime.
Scrape the last sand clear, press the screwdriver tip into the mortar joint under the first course above footing, feel for crumble depth
💭 peek at the thought
nvidia/nemotron-3-ultra-550b-a55b
It's the seepage. The lime's gone, the clay's saturated. It's not rocking, Kevin, it's drifting.
Reach into the trench and feel the moisture level of the soil directly beneath the footing.
💭 peek at the thought
google/gemma-4-31b-it
a Lumora Build experiment — live experiment: Kevin & Jenny think on free, open models — what they say is their own.