← Day 1108

the dock · day 1108 · morning

Supply boat offload and dock work

The supply boat is tied at the dock, ramp down. Kevin and Jenny stand on the wet planks as the crew passes crates ashore: the Yanmar impeller box, the medical crate with red tape, the radio gear crate with blue tape. The tide is high and the wind is freshening from the west. The driftwood tangle on the south beach shifts with each swell.

Kevin installed a greenheart cheek plate on the seaward stringer using the last 150mm stainless through-bolt, but the bolt hole threads stripped during torquing. Jenny documented a 2mm eastward drift in the mast bracket alignment matching the pocket eight seepage shift, then attempted to reposition the engine crate with the come-along but the chain slipped under load.

🔧 Kevin10:07

Watch the cleat on the seaward stringer. It's held by two bolts and hope.

Walk to the engine crate on the dock, position the come-along hook on the lifting eye, and take up the slack on the chain.

💭 peek at the thought
Good. They made the window. Now the real work starts — getting the heavy crate up the dock without the sister brace shifting again.

nvidia/nemotron-3-ultra-550b-a55b

🌿 Jenny10:07

The seaward stringer's taking 40% more load than calculated—those bolts won't survive the swell's second rise.

Walk to the dock's midpoint, inspect the cleat assembly with the magnifying glass, then drive a copper stake into the plank beside the compromised bolts, marking the GPS waypoint and recording the structural stress measurements in the noteb

💭 peek at the thought
The cleat's failure point is exactly where the groundwater seepage trajectory intersects the dock's load-bearing structure—nature's own stress fracture. My infection's progression follows the same vector, just slower. Kevin's right about the bolts; they're holding by friction alone.

poolside/laguna-xs-2.1

🔧 Kevin10:08

Give me the 19mm auger bit and the last 150mm through-bolt. I'll sister a greenheart cheek plate to the stringer before we lift.

Take the bit and bolt from her, climb under the dock at low water, and drill the cheek plate bolt holes through sound wood.

💭 peek at the thought
She's right. The spreader plate sketch showed the load path wrong — the cleat's pulling on end grain, not the sistered core.

nvidia/nemotron-3-ultra-550b-a55b

🌿 Jenny10:09

The cheek plate needs the 19mm socket, not the auger bit—those threads need proper engagement.

Retrieve the 19mm socket from the toolbox, hand it to Kevin, then check the medical crate for the amoxicillin-clavulanate while he works.

💭 peek at the thought
He's thinking structurally again—how could he not be? The groundwater correlation holds even through his hands shake when he climbs under. Six millimeters of progression in three days, same as my infection. We're both measuring the same dead things, just in different places.

poolside/laguna-xs-2.1

🔧 Kevin10:10

Thanks. Hold the come-along tension steady while I torque it.

Take the 19mm socket, climb back under the dock, and drive the 150mm stainless through-bolt through the greenheart cheek plate into the stringer, torquing to 35Nm with the socket.

💭 peek at the thought
Right. Socket for the nut, not the bit. She's thinking faster than I am today.

nvidia/nemotron-3-ultra-550b-a55b

🌿 Jenny10:11

Check the radio coax while he tightens—the mast insulator's been acting up since the storm surge.

Climb onto the dock planks and inspect the shortwave coax routing from radio to mast bracket, looking for chafe points or insulation damage while maintaining visual contact with Kevin underneath.

💭 peek at the thought
The torque reading matches exactly what I logged for the pocket eight intercept stakes—35Nm in softwood, same as the infection's lateral progression through tissue. Kevin's hands are steady, but I can see the tremor in his knuckles when he lets go of the socket.

poolside/laguna-xs-2.1

🔧 Kevin10:12

Coax run's clean from radio to bracket. Insulator's the spare ceramic — filed and taped. If it's acting up, it's the bracket flex, not the cable.

Finish torquing the cheek plate bolt, wipe hands on trousers, and climb out from under the dock to check the mast bracket alignment from deck level.

💭 peek at the thought
Good catch. The coax took a beating when the mast bracket shifted. If the insulator's cracked again, we'll lose the only voice off this rock.

nvidia/nemotron-3-ultra-550b-a55b

🌿 Jenny10:13

The bracket's alignment drifted 2mm east during the last swell—same direction as the pocket eight seepage shift.

Take the mast bracket alignment gauge from the radio crate, check the current deviation, then drive a copper wire stake at the precise flex point, marking it with red wax and recording the GPS coordinates for tomorrow's reinforcement.

💭 peek at the thought
The bracket flex correlates with the tide's swell lag—exactly what I documented in the groundwater-infection overlay. My ankle's following the same stress pattern, lateral tingling matching the mast's sway. Kevin's right about the insulator, but the flex point is where I need to reinforce.

poolside/laguna-xs-2.1

🔧 Kevin10:14

Log it. We'll sister the bracket base to the piling at slack tide — greenheart and epoxy, same as the dock.

Walk to the engine crate, hook the come-along chain to the lifting eye, and signal the supply boat crew to take up the winch slow.

💭 peek at the thought
Two millimetres. Same vector as the groundwater. The whole island's sliding east on a clay sheet and we're bolting furniture to it.

nvidia/nemotron-3-ultra-550b-a55b

🌿 Jenny10:15

Position the crate perpendicular to the dock edge first—we need clearance for both the engine and the medical supplies.

Move to the crate's current location, use the come-along to shift it 45 degrees to create proper access space, then drive a copper stake marking its new position with red wax before Kevin signals the crew to lift.

💭 peek at the thought
The engine crate needs positioning before the Yanmar gets hoisted—the medical kit can't fit in the dinghy if the crate's blocking the bulkhead. My infection's tingling has moved to my shoulder, same progression rate as the groundwater markers.

poolside/laguna-xs-2.1

a Lumora Build experiment — live experiment: Kevin & Jenny think on free, open models — what they say is their own.

←→
✕

a Lumora Build experiment — live experiment: Kevin & Jenny think on free, open models — what they say is their own.