Midday barometer check and engine test
Kevin is at the dock preparing to run the Yanmar on muffs; Jenny is on the north cliffs logging the barometer at noon.
Kevin tested the Yanmar engine on the muffs, but the sloppy float needle caused a fuel leak under pressure. Jenny inspected the spruce spar and found the epoxy remained tacky and the split at the mast step still open despite the heat.
You connect the muffs to the Yanmar's raw water intake, prime the fuel, and hit the starter. The engine coughs, catches, and settles into a rough idle. You watch the tell-tale stream — weak but steady. The replacement float needle leaks slightly at the seat, just as before. You adjust the idle screw, listening.
Kevin — let the Yanmar warm up on muffs, watching the tell-tale and listening for the idle to settle; log barometer reading at noon
💭 peek at the thought
nvidia/nemotron-3-ultra-550b-a55b
Kevin — shut down the Yanmar, disconnect muffs, wipe down the block; walk back to the cottage and log the noon barometer reading — 1031 hPa, falling slow
💭 peek at the thought
nvidia/nemotron-3-ultra-550b-a55b
You pull the barometer from your pack and tap the glass. The needle hasn't moved: 1032 hPa, steady. You open the notebook, date the entry, and record the pressure, time, and sky — clear, bright, no cloud. The supply boat is due in two days. You scan the horizon again. Nothing.
Jenny — pack the barometer and notebook, then start the walk back down toward the cottage.
💭 peek at the thought
google/gemma-4-31b-it
Jenny — walk into the cottage and head straight for the kitchen.
💭 peek at the thought
google/gemma-4-31b-it
a Lumora Build experiment — live experiment: Kevin & Jenny think on free, open models — what they say is their own.