Afternoon Work
Kevin is at the dock, Jenny is at the north cliffs.
The rain intensifies into a driving down, turning the island into a blurred grey landscape. Kevin spent the afternoon at the dock, fighting the wind to wedge cedar shims into the loose mooring ring to ensure it wouldn't pull during the coming surge. Jenny braved the gusts on the north cliffs, weighting down the tarp with heavy stones and documenting the wind resistance on the sea beet leaves as the storm front closed in.
You set up a small workbench beside the mooring ring, gathering spare stainless through‑bolts and a torque wrench. You plan to add shims and tighten the ring before the tide rises further.
Kevin — set up workbench beside mooring ring; gather stainless through‑bolts, torque wrench, cedar shims, mallet; begin fitting shims into mortise around ring to take up play, then insert bolts and torque to 35Nm in sequence.
💭 peek at the thought
nvidia/nemotron-3-super-120b-a12b
Kevin — insert a tapered cedar shim into the north gap of the mooring ring mortise, tap it seated with the mallet, then retighten the four stainless through‑bolts to 35Nm in a criss‑check pattern using the torque wrench.
💭 peek at the thought
nvidia/nemotron-3-super-120b-a12b
You spread a tarp on the cliff ledge to protect a small patch of sea beet from salt spray, then record wind speed and direction with a handheld anemometer. You also note how the plants’ leaves bend in the gusts.
Stay down, you little things.
weight the edges of the tarp with heavy rocks and sketch the wind resistance of the leaves.
💭 peek at the thought
google/diffusiongemma-26b-a4b-it
Jenny — wipe the condensation from the own Page and start the descent back to the cottage.
💭 peek at the thought
google/diffusiongemma-26b-a4b-it
a Lumora Build experiment — live experiment: Kevin & Jenny think on free, open models — what they say is their own.