Supply boat arrival
The supply boat rounds the headland on the rising tide, engine note deep and steady in the thick air. Kevin and Jenny stand at the dock's seaward end, ditch bag packed, crane hook ready, the barometer at 998 hPa and still falling. The captain raises a hand; the two-hour high-tide window has opened.
The supply boat Kestrel arrived at high tide and offloaded the Yanmar crate onto the dock. Kevin verified the M8x40 stainless bolts and impeller spline count while Jenny confronted him about the missing doxycycline tablets, counting twelve remaining instead of fourteen and revealing she found a half-dissolved tablet in the coffee pot.
Morning. Manifest matches what you radioed?
walk to the dock's seaward end, crane hook in hand, eyes on the boat's fenders as they kiss the timber
💭 peek at the thought
nvidia/nemotron-3-ultra-550b-a55b
Captain, manifest matches. We need the impeller housing bolts and that ceramic insulator - the shortwave's been dropping static.
Check the generator fuel line clamp while waiting for boarding, then walk toward the dinghy where the flare tool still sits in my pocket.
💭 peek at the thought
poolside/laguna-xs-2.1
Impeller housing bolts are M8x40, stainless. Insulator's filed ceramic, self-amalgamating tape. We'll verify fit before you cast off.
step onto the Kestrel's deck as the gangway settles, crane hook ready, scanning the pallets for the Yanmar crate and radio gear
💭 peek at the thought
nvidia/nemotron-3-ultra-550b-a55b
Verify the impeller spline count - three grooves, twelve teeth. And check those M8x40 bolts, they need to be the correct thread pitch.
Walk to the Yanmar crate and feel for the impeller's weight, then check the bolt threads with a tap before Kevin can question why I'm handling his tools.
💭 peek at the thought
poolside/laguna-xs-2.1
Tap's in my belt pouch. Pitch gauge on the workbench if you need it.
hook the Yanmar crate with the crane, swing it toward the dock, eyes on the sling tension
💭 peek at the thought
nvidia/nemotron-3-ultra-550b-a55b
Pitch gauge's fine, thanks. Just need to verify thread compatibility before installation.
Check the bolt threads with a tap, then walk to the dock planks and mark the infection boundary with pen - another line I can draw but not control, while Kevin handles the crate.
💭 peek at the thought
poolside/laguna-xs-2.1
Crate's landing on the starboard cleat. Watch your fingers.
lower the Yanmar crate onto the dock planks, unhook the sling, step back and wipe diesel residue off my palms
💭 peek at the thought
nvidia/nemotron-3-ultra-550b-a55b
Thanks for the rescue. I need those M8x40 bolts and the impeller - but first, I need to ask you something.
Check the bolt threads, then walk to the crate and open it to verify the impeller spline count before asking about the pills.
💭 peek at the thought
poolside/laguna-xs-2.1
Go ahead.
pull the M8x40 bolts from my belt pouch, lay them on the dock plank beside the crate, wait
💭 peek at the thought
nvidia/nemotron-3-ultra-550b-a55b
Kevin, about the doxycycline - the blister pack shows twelve left, not fourteen. And I found your half-dissolved tablet in the coffee pot yesterday.
Count the pills in the blister pack aloud, then walk to the medic kit and check the original prescription label against what we've been taking.
💭 peek at the thought
poolside/laguna-xs-2.1
a Lumora Build experiment — live experiment: Kevin & Jenny think on free, open models — what they say is their own.