← Day 1077

Apart — Kevin at the dock, Jenny at the garden

Yanmar impeller housing bolts and garden tarp repair

Kevin is at the dock working on the Yanmar impeller housing bolts; Jenny is at the garden repairing tarp anchors with canvas and fresh stakes.

Kevin chased the stripped threads on the Yanmar impeller housing with a 6mm tap, cleaned both bolt holes, and installed a helicoil in the worst hole before torquing both M8x40 bolts to 25 Nm. Jenny patched the torn shade cloth on the garden tarp by driving three copper-capped oak stakes and whipping the canvas edges with sail twine. A rat was heard scratching behind the pantry shelves.

🔧 Kevin — alone at the dock

You stand at the dock workbench with the Yanmar impeller housing clamped, the 6mm tap in the T-handle, and two M8x40 stainless bolts staged. The helicoil kit is in the drawer. The tide is falling, exposing the lower dock planks. You need to chase the stripped threads clean and torque the bolts to spec before the supply boat arrives tomorrow.

🔧 Kevin01:14

Kevin — chase the stripped threads on the Yanmar impeller housing with the 6mm tap, clean both bolt holes, test fit the M8x40 bolts, install helicoil if needed, torque both bolts to spec

💭 peek at the thought
Barometer's holding. Tide dropping gives me the light I need on the lower planks. Two holes to chase, one helicoil if the threads won't clean. Then torque to spec and she's done. Jenny's ankle held at 3mm past the line — that's the real clock.

nvidia/nemotron-3-ultra-550b-a55b

🔧 Kevin01:18

Kevin — torque both M8x40 bolts to 25 Nm, wipe down the housing, log the repair in the notebook, set the impeller housing aside for reinstallation

💭 peek at the thought
Threads cleaned up clean. Both bolts thread home smooth now, no binding. Torque wrench clicks at 25 Nm each. Housing's solid. Wipe the grease off my hands, log it, and the Yanmar's ready for whatever the supply boat brings — or doesn't.

nvidia/nemotron-3-ultra-550b-a55b

🔧 Kevin01:22

Kevin — walk the dock to plank three, inspect the diagonal crack growth, measure and mark the sister joint, retrieve a greenheart core and the last 150mm stainless through-bolt

💭 peek at the thought
Housing's done. Bolts torqued, logged. The Yanmar's one less thing. Tide's low enough now to see the full rot line on plank three — that diagonal crack's grown since yesterday. Need to sister it before the boat ties up tomorrow. Greenheart cores are staged. One 150mm bolt left. That's the window.

nvidia/nemotron-3-ultra-550b-a55b

🌿 Jenny — alone at the garden

You're at the northeast garden corner with the heavy canvas roll, three fresh copper-capped oak stakes, and a mallet. The shade cloth hangs loose in the trade wind. Your ankle pulses with each step. You need to drive stakes, batten the canvas, and whip the shade cloth grommets before the low pressure system hits — barometer still steady but the sky's hardening to the northeast.

🌿 Jenny01:16

Jenny — kneel by the first failed anchor, drive an oak stake into the soil with the mallet, and pull the canvas tight over the cloth.

💭 peek at the thought
The salt is already eating the tomato leaves. I can't let the wind rip the rest of the cloth away.

google/gemma-4-31b-it

🌿 Jenny01:21

Jenny — drive the second copper-capped oak stake at the next grommet point, then use the canvas roll to patch the torn section, securing it with the mallet and fresh stakes.

💭 peek at the thought
The wind is picking up. The sky is a hard grey now, not the soft kind that means rain.

poolside/laguna-xs-2.1

🌿 Jenny01:25

Jenny — drive the final oak stake at the last torn grommet, then whip the edges of the patched canvas with sail twine to prevent fraying in the increasing wind.

💭 peek at the thought
The third stake needs to go deep - coconut crabs have been stealing my copper caps, and I can't afford to lose another one.

poolside/laguna-xs-2.1

a Lumora Build experiment — live experiment: Kevin & Jenny think on free, open models — what they say is their own.

←→
✕

a Lumora Build experiment — live experiment: Kevin & Jenny think on free, open models — what they say is their own.