← Day 1046

Apart — Kevin at the keeper's cottage, Jenny at the garden

Supply boat arrival prep and pocket eight delay

Kevin is at the cottage reviewing the Yanmar housing bolt problem; Jenny is at the garden assessing the flooded pocket eight planting area.

Kevin chased the stripped threads in the Yanmar impeller housing with the 6mm tap but the broken tap fragment remained lodged, leaving one bolt hole unusable. Jenny walked the groundwater seepage route from pocket seven to the shrine, placing fresh red wax markers on stones despite her throbbing ankle, then returned to the garden to prepare pocket eight for planting.

🔧 Kevin — alone at the keeper's cottage

You sit at the kitchen table with the tap set and the housing bolts laid out. The stripped hole and missing bolt on the impeller housing need a fix before the supply boat arrives tomorrow. The 6mm tap is clean, but the broken tap fragment in the other hole won't budge. You have the spare M8x40 stainless bolt in your pocket. Coffee's cold in the tin mug.

🔧 Kevin05:05

Kevin — pick up the 6mm tap and chase the stripped hole threads, feeling for bite

💭 peek at the thought
The stripped hole will take a tap chase clean. The broken tap fragment in the other hole is the real problem — extractor set didn't move it, drill bit barely touched it. Could helicoil it if the supply boat brings the kit. Could also drill and tap oversize, but that's messing with Yanmar spec on raw water pump. Spare M8x40 in my pocket's clean threads, correct length. Two good bolts hold now. Third hole empty, fourth stripped. Runs at idle. Won't hold at load.

nvidia/nemotron-3-ultra-550b-a55b

🔧 Kevin05:08

Kevin — torque the three good housing bolts to spec, wipe hands on rag, stare at the empty hole and the lodged fragment

💭 peek at the thought
Tap chased clean — threads hold now. Third hole still empty, broken tap fragment lodged deep in the fourth. Extractor set failed. Drill bit didn't touch it. Could try left-hand drill bit from the crate, but if that snaps I've got a hardened drill bit stuck in a broken tap in a raw water pump housing. Supply boat brings parts tomorrow. Helicerts. Maybe new housing. For now, two bolts and a chased hole. Housing's torqued to spec on the three good holes. Vibration log showed fix verified at load. But that was with the old impeller. New one's in. Sea trial needed.

nvidia/nemotron-3-ultra-550b-a55b

🌿 Jenny — alone at the garden

You stand at the garden wall looking down at pocket eight — the planting grid you marked yesterday is underwater, the high tide still covering the north ridge slope. The bamboo stakes you carved are somewhere in the drift. The groundwater seepage route you wax-marked runs right through the planting zone. You'll have to wait for the tide to drop, or replan. Your ankle aches in the damp air.

🌿 Jenny05:07

(to the garden wall, to the water, to the salt wind)

kneel on the wet stone, press hand against ankle, feel for heat and swelling

💭 peek at the thought
The tide's swallowed my planting grid whole. Grandmother's seeds are scattered in the mud now, and I can't even mark where they are. My ankle's throbbing against this damp stone - the infection's not helping. But the seepage route... it's still there, still marked, still leading to those shrine stones. Water will recede. I'll wait. I'll replant. I've got to.

poolside/laguna-xs-2.1

🌿 Jenny05:11

(to the garden wall, to the water, to the salt wind)

stand, test weight on ankle, then walk to shrine to collect spruce offcuts

flagged: repeated_opener

💭 peek at the thought
The bamboo stakes are gone, but I can use the carved spruce offcuts from the shrine instead. The grid needs to be higher, raised on something. And I need to mark where the seeds actually are now - underwater. The seepage route is still valid, but it cuts through where I want to plant. I'll shift pocket eight's boundary. Make it work with the water, not against it.

poolside/laguna-xs-2.1

a Lumora Build experiment — live experiment: Kevin & Jenny think on free, open models — what they say is their own.

←→
✕

a Lumora Build experiment — live experiment: Kevin & Jenny think on free, open models — what they say is their own.