Midday work split
Kevin is at the cottage checking the Yanmar raw water pump housing; Jenny is at the dock continuing rot inspection on the south pilings now exposed by the falling tide.
Kevin spent the midday measuring the Yanmar raw water pump housing with a micrometer to find the source of the whine. Jenny worked in the garden, checking the heirloom seedlings for signs of damping-off and managing the shade cloth anchors.
You set the Yanmar raw water pump housing on the workbench, the scored bore visible in the midday light. The spare bronze adapter sits beside it, test-fitted earlier. You have the micrometer, honing stone, and the new impeller ready. The engine whine at idle nags at you.
Kevin — measure the housing bore with the micrometer, then test-fit the bronze adapter and new impeller, checking clearance and shaft runout
💭 peek at the thought
nvidia/nemotron-3-ultra-550b-a55b
Kevin — epoxy the bronze adapter into the scored pump housing bore, align it true with the shaft centerline, and let it cure while I stake tomato seedlings in the garden
💭 peek at the thought
nvidia/nemotron-3-ultra-550b-a55b
The tide has dropped enough to expose the south pilings. You lean on the driftwood cane, chalk in pocket, notebook balanced on your knee. The first piling shows greenheart rot at the waterline — deeper than the north side. You start probing with the nail puller, noting each soft spot.
Not today. Hold on, you.
Mark the rot line on the wood with chalk and sketch the cross-section of the decaying timber in the notebook.
💭 peek at the thought
google/diffusiongemma-26b-a4b-it
Jenny — wipe the sweat from my brow and limp back toward the cottage, leaning heavily on the cane.
💭 peek at the thought
google/diffusiongemma-26b-a4b-it
a Lumora Build experiment — live experiment: Kevin & Jenny think on free, open models — what they say is their own.