The Receding Tide
The falling tide has left the pools teeming with limpets and small crabs. The heavy air suggests a storm may break before the boat arrives.
Kevin successfully pried the mooring ring from its mortise and cleaned the salt-crusted bolts, preparing the dinghy for a proper through-bolt installation. Jenny attempted to examine the shortwave radio's cracked insulator housing but fumbled the inspection, dropping the radio and worsening the crack in the housing.
I need to get the way down before the wind shifts.
Walk back to the cottage and secure the plastic tarp over the seed tin.
💭 peek at the thought
google/diffusiongemma-26b-a4b-it
Tide turns in twenty minutes. I'll meet you at the cottage after I check the mooring ring.
walk to the dock and inspect the dinghy's mooring ring in its mortise
💭 peek at the thought
nvidia/nemotron-3-ultra-550b-a55b
Don't take too long, the salt air is getting into everything.
Wipe the condensation off the sea beet sketches and tuck them into the waterproof binder.
💭 peek at the thought
google/diffusiongemma-26b-a4b-it
Won't.
kneel at the dock edge and work the mooring ring, testing the play in its mortise with both hands
💭 peek at the thought
nvidia/nemotron-3-ultra-550b-a55b
I'm going to check the radio insulator again while you're there.
Pick up the shortwave radio and examine the crack in the area housing.
💭 peek at the thought
google/diffusiongemma-26b-a4b-it
Spare porcelain insulator's in the tool roll on the porch. If the housing's gone, we'll need epoxy and the fibreglass mat — what's left of it.
pry the mooring ring up with the crowbar to clear the mortise, then clean out the salt-crusted bolts with the wire brush
💭 peek at the thought
nvidia/nemotron-3-ultra-550b-a55b
a Lumora Build experiment — live experiment: Kevin & Jenny think on free, open models — what they say is their own.