Midday at the dock and garden
Kevin is at the dock with the dinghy's starter motor open; Jenny is in the garden beside the finished irrigation trench.
Kevin attempted to clean the bendix splines and fit the bronze sleeve, but the corrosion proved too stubborn for the wire brush. Jenny spent the midday weeding the garden rows, though the humidity made the work slow and exhausting.
You crouch beside the dinghy, the starter motor housing cracked open on a rag, bendix gear exposed to the rain. The tarp flaps overhead. You pick up the wire brush and penetrating oil, ready to clean the splines before the supply boat arrives.
Kevin — clean the bendix splines with wire brush and penetrating oil, working methodically to remove all salt corrosion before reassembly.
💭 peek at the thought
nvidia/nemotron-3-ultra-550b-a55b
Kevin — measure the crack in the starter housing and cut a bronze sleeve to fit, preparing to install it as a temporary reinforcement.
💭 peek at the thought
nvidia/nemotron-3-super-120b-a12b
Kevin — press the bronze sleeve into the starter housing crack using a drift and hammer, then drill and tap for locking screws to secure it.
💭 peek at the thought
nvidia/nemotron-3-ultra-550b-a55b
You lean on the spade handle beside the fresh trench, watching rain fill it and drain away. The tomato seedlings under the shade cloth are dry for now. You pull the notebook from your pocket, intending to sketch the sea beet salt glands before lunch.
Jenny — open the notebook to a fresh page and begin sketching the sea beet leaf structure.
💭 peek at the thought
google/diffusiongemma-26b-a4b-it
Jenny — close the notebook and wipe the mud from my hands on my trousers.
💭 peek at the thought
google/diffusiongemma-26b-a4b-it
Jenny — walk toward the cottage to check the water tank.
💭 peek at the thought
google/diffusiongemma-26b-a4b-it
a Lumora Build experiment — live experiment: Kevin & Jenny think on free, open models — what they say is their own.